Field Tests of Cement

 Sometimes it is required to perform tests for evaluating the condition of the supplied cement in site within a very short period of time. As it is not possible to have any laboratory test in this short period, therefore, it is done with the help of some basic field tests. Although these tests are not very accurate, they provides some basic idea to the civil engineer regarding the quality of the cement.


Field Tests of Cement for Civil Engineers




Date of Manufacturing: As the strength of cement reduces with age, the date of manufacturing of cement bags should be checked.


Cement Color: The color of cement should be uniform. It should be typical cement colour i.e. grey colour with a light greenish shade.
Whether Hard Lumps are Formed: Cement should be free from hard lumps. Such lumps are formed by the absorption of moisture from the atmosphere.
Temperature Inside Cement Bag: If the hand is plunged into a bag of cement, it should be cool inside the cement bag. If hydration reaction takes place inside the bag, it will become warm.
Smoothness Test: When cement is touched or rubbed in between fingers, it should give smooth feeling. If it felt rough, it indicates adulteration with sand.
Water Sinking Test: If a small quantity of cement is thrown to the water, it should float some time before finally sinking.
Smell of Cement Paste: A thin paste of cement with water should feel sticky between the fingers. If the cement contains too much pounded clay and silt as an adulterant, the paste will give an earthy smell.
Glass Plate Test: A thick paste of cement with water is made on a piece of glass plate and it is kept under water for 24 hours. It should set and not crack.
Block Test: A 25mm × 25mm × 200mm (1”×1”×8”) block of cement with water is made. The block is then immersed under water for three days. After removing, it is supported 150mm apart and a weight of 15kg uniformly placed over it. If it shows no sign of failure the cement is good.

Comments

Post a Comment

Popular posts from this blog

Calculation Of Quantity Of Cement, Sand And Brick In Wall

Image
Assuming 1- Grade of mortar = 1:6 (cement : sand) 2- Class A brick (19 cm x 9 cm x 9 cm) 3- Volume of brick work = 1.0 m^3, (wall size =1*1*1 =1.0 m^3) 4- Thickness of mortar = 10 mm Step 1 :- Calculation of bricks No. of bricks = (volume of brick work / volume of one brick with mortar) Volume of one brick (without mortar) = .19*.09*.09 = 0.001539 m^3 since thickness of mortar = 10 mm (0.01 m) Volume of brick with mortar = (0.19+0.01) x (0.09+0.1)x (0.09+0.1) = 0.2×0.1×0.1 = 0.002 m^3 Number of brick required in brick work volume = 1.0 m^3 therefore, No.of bricks = 1.0/ (0.002)  =  500 Nos. consider the percentage of waste  as 10 % or 15 % Total no. of bricks = 500 + (10 x 500 )/100=550 Step 2 :- Calculation for quantity of mortar Since we need 500 no of bricks volume occupied by bricks = No of bricks x volume of one brick Volume of bricks = 500 x 0.001539 = 0.7695 m^3 Volume of mortar = Volume of brick work – Volume of Bricks...
Read more

TENDERING, ESTIMATING AND QUANTITY SURVEYING – Tendering Methods & procedures

TENDERING, ESTIMATING AND QUANTITY SURVEYING – Tendering Methods & procedures: Tendering Methods & procedures: Methods of Contractor Selection: The selection of a contractor to carry out construction works in a project is a very important matter. A wrong choice may lead to an unhappy client / contractor relationship. It also may end up with dissatisfied client and sometimes even with an insolvent contractor. The client’s professional advisers should find a contracting company; That is financially stable / and has a good business record. For which the size of project is neither too small nor too large. That has a reputation for good quality workmanship and efficient organization. There are three principal methods for choosing a contractor: (a) open tendering, (b) selective tendering, (c) nomination. Open Tendering – Initiated by client’s architect/ quantity surveyor advertising in newspapers and/or inviting contractors to apply for tender documents and to tender...
Read more

Usefull Civil Engineering Calculation

Usefull Civil Engineering Calculation CONCRETEGRADE: M5 = 1:4:8 M10= 1:3:6 M15= 1:2:4 M20= 1:1.5:3 M25= 1:1:2 Weight of Engineering Materials 1.Bitumen – 1340 Kg / M3 2.Cement – 1440 Kg / M3 3.Gold – 19224 Kg / M3 4.Ice – 913 Kg / M3 5.Wrought Iron – 7700 Kg / M3 6.Pig Iron – 7200 Kg / M3 7.Cast Iron – 7650 Kg / M3 8.Lead – 11374 Kg / M3 A.C Sheets – 17 kg / M2 10.Petrol – 690 Kg / M3 CLEAR COVER TO MAIN REINFORCEMENT: 1.FOOTINGS : 50 mm 2.RAFT FOUNDATION.TOP : 50 mm 3.RAFT FOUNDATION.BOTTOM/SIDES : 75 mm 4.STRAP BEAM : 50 mm 5.GRADE SLAB: 20 mm 6.COLUMN : 40 mm 7.SHEAR WALL : 25 mm 8.BEAMS : 25 mm 9.SLABS : 15 mm 10.FLAT SLAB: 20 mm 11.STAIRCASE : 15 mm 12.RET. WALL : 20/ 25 mm on earth 13.WATER RETAINING STRUCTURES : 20/30 mm WEIGHT OF ROD PER METER LENGTH: DIA WEIGHT PER METER 6mm = 0.222Kg 8mm = 0.395 Kg 10mm = 0.616 Kg 12mm = 0.888 Kg 16mm = 1.578 Kg 20mm = 2.466 Kg 25mm = 3.853 Kg 32mm = 6.313 Kg 40mm = 9.865 Kg 1bag cement-50kg 1feet-...
Read more